Can Jewelry Be Copyrighted?

In today’s world, over the last couple of decades, the demand for jewelry has been increased. There are many reasons for this increase. However, as a result of this change, many producers have been worried about how to protect their designs. At this point, copyright policy has an essential role. It is important to know the basics of both protecting and copyrighted. Otherwise, it can be harmful to both parties. Copyright is one of the ways of protecting your jewelry design.

There are three different ways to protect jewelry designs. These are copyright, patent, and trademark. It is possible to apply one of them or all of them. It is something completely up to designers and producers.


It is a law that protects creativity basically. With copyright, designers and producers are taking granted their jewelry designers with legal protection. It is a way to protect unique works, visual arts, copyrights, and selling. If you are a designer or producer, you have already known that when you design something the first time, it is protected automatically by copyright law.

You don’t need to do anything specific when you create your work. Your work is protected by law directly. It is not only your original work, but its derivatives are also protected directly with copyright law. It means, if you want to produce something similar to your work in the future, it will be already protected.

It is protected automatically, however, some producers and designers prefer to work with professionals. These professionals are working in the US or international copyright offices. It makes sense actually, because how can people know that it is the first time created? In this way, they register their work in the office immediately after they have been created. Eventually, they create a record that everyone can reach their copyrighted design. Nevertheless, you need to keep in mind that copyright is used in order to protect the jewelry on the surface level. It protects the design only.

It protects only the surface level means that it doesn’t protect any mechanical parts of your jewelry, which means it doesn’t protect your stone, your chain, or your clasp you used in your design. Copyright protection can be extended only for aesthetics. There should be new contributions to change its aesthetic appearance in order to extend it.
When you register your design in the copyright office, it gives you an opportunity to take legal advances and actions. It may seem unimportant but it is a very important step. For instance, let’s say you created a unique design, you registered in the copyright office, and somehow someone copied your work. This registration gives you an opportunity to defend your work and design. You can even file the other part.

You need to keep in mind that it is not a free service. You need to pay a small amount of money in order to protect your work. Compared to what you have created, this amount is nothing for protection. It costs 35 dollars only. This process doesn’t take long, at most it takes 1 hour long. There are a couple of documentations and photos of your work needed in order to apply for copyright rights. With this small amount of time and money, you will protect your jewelry as long as you live. Copyright protection is legal i-until the designer’s death.

How to Register a Jewelry Design for Copyright Protection

First of all, you do not need to register your design in registration offices for copyright protection. It is something happening directly when you create your work. There is no need for paperwork. However, it is good and in the long run beneficial step to register your work for copyright. It would be a good idea to take legal action. It has some advantages. It will be more open to the public. Everyone can search and see your work. It will be known by the law and with the paper they provide you, you will have proof. Let’s say there will be a problem and someone will try to copy your work, you will have a right to sue.

In order to register in copyright offices, there are some steps needed to be followed. First of all, you need to complete the registration form. Secondly, you should forget the registration fee. It is not a big amount. It is money worth spending. And lastly, don’t forget to submit the necessary documentation and papers.

  • Completing the form: Each jewelry you have designed needs a separate registration form. Each design should have a name, a title, and a collection if there is already have one. After completing the form, the copyright offices provide guidance in detail.
  • Fee: If you want to protect your design, the registration fee is compulsory. Each application needs a separate registration fee. If you want to pay less, you need to keep in mind that electronic application is cheaper than a paper application. You can find accurate and up-to-date information about the registration fee in the copyright offices.
  • Requirements: There could be some documentation, papers, and photos needed in order to register in the copyright office. You may need to upload a copy of your work. Since the jewelry is three-dimensional work, you need to upload a photo of your work or drawing of your work. The only thing you need to pay attention to is that these photos should demonstrate details as well. If your design includes specific details that need to be protected, you need to include those details in the form. These details could be style, gemstones, metal, or color. If you think it is an important detail, don’t forget to add it.

Copyright protection provides both moral and economic protection. Economic protection allows a designer to prevent the work he/she has created. Moreover, moral protection preserves the right of the designer about the work he/she has created. In case of any opposition or copying, they have a right to defend themselves and their designs.

It is obvious that there are so many advantages of copyrighted jewelry. On the other hand, there are some disadvantages as well. As the first thing, it takes time and money. It depends on how many jewelry designs you want to register in the copyright office. It may be very expensive. Nevertheless, you can register your new designs under the name of your old collections and it leads to paying less money. And of course, this is valid only if you want to use your designs for commercial purposes.

After all these steps completed, The Copyright Office is going to go through every detail of your applications and if it is approved, they are going to send a certification to you in the mail. After receiving the mail, you need to check whether there is a mistake or not. If there is any problem, don’t hesitate to call them immediately. Or vice versa, if they think that there is a mistake or missing, they are going to call you immediately.


Even though it is different than copyright, it is possible to get both of them at the same time from related offices. There may be huge differences or overlaps. You can learn them in detail by applying the offices directly.
A patent protects the overall appearance of the work that is produced by designers. It needs to meet some requirements. It has to be completely new and designers should convince professionals that it is sufficiently different. Then, that work deserves to get a patent.

On the contrary to what we have mentioned above, which is how copyright protects the design, a patent protects the shape. It doesn’t protect functional features. It protects the design if it includes some mechanical advances.

Before applying for a patent, it is important to search for whether there are similar designs or not. The application is done online. Even though it is important, it is not preferred by designers and producers. It is not as common as copyrights.


Trademarks are the most inclusive one to protect your works. There are many things included in trademarks. For example, words, names, symbols, or designs. If it is somehow related to the identification of the work, it can be added to trademarks. The uniqueness of your work is very important in this case. When you see the jewelry design, you should make a connection with the brand or company immediately.

On the contrary to copyright and a patent, it protects the brand names and logos instead of the work itself. As we have mentioned above, it is more broad protection. In order to protect the symbols of their brands and symbols of their jewelry, designers and producers should apply for trademarks.

In order to get a trademark, there are some requirements. The design element should be unique. There shouldn’t be any identical design in the marketplace. There is a need for secondary meaning for trademarks. It is a great way to protect your jewelry, however, compared to other protection ways, it takes a longer time to complete, and for example, it can take more than a year.

Copyrighted Jewelry You Can Find on Amazon

There is a lot of copyrighted jewelry available to choose from on the market. On the other hand, on Amazon, it becomes easier. Especially if you are looking for theme jewelry, more or less all of them are copyrighted and it is easy to reach them on Amazon. We have listed a couple of them down below.

iloveDIYbeads 100g (20 pieces) Craft Supplies Mixed Flying Dragon Charms Pendants Beads Charms Pendants for Crafting

These are copyrighted pendants in order to use making jewelry. These dragon charms are very fashionable. They are in silver and bronze colors. They are adorable and very well made. They are lead-free and nickel-free charms. With its affordable price, you will be very pleased with your purchase. 

SalesOne LLC Aquaman Collectibles | Aquaman Movie Maori Toki Pendant

It is a special edition copyrighted necklace. It comes how it is advertised. Even though the stone is opaque, it is worth the money you are going to spend on. It is a great gift option as well. Overall, you will be very satisfied with your purchase. 

HARRY POTTER Official Licensed Jewelry Earrings

They are official and copyrighted Harry Potter earrings. There is a copyright logo on the back of the earrings. It is a good way to make Harry Potter fans happy. It is a cute way to remember your childhood. They are very cute and adorable. They will look amazing on anyone’s ears. Overall, with its budget-friendly price, you will be pleased with these earrings. 

Renaissance Jewelry Sterling Silver Angel Wings Design Dangle Drop Earrings For Sensitive Ears 

These earrings are highly detailed products with a highly polished finish. The company is registered in the copyright office and it has both a trademark and a patent. Thanks to being copyrighted, it is impossible to find the same one in a different company. You will feel unique when you wear these earrings. They are very nice and adorable. They are in good size in order to fit everyone’s ears and necks. Overall, you will be very pleased with your purchase. 

Renaissance Jewelry Sterling Silver Filigree Dangle Drop Chandelier Earrings For Sensitive Ears 

These are another pair of earrings copyrighted in this company. They meet all the requirements for a copyright, a patent, and a trademark. If you want to feel unique or you want to make someone feel unique, these earrings should be your first choice. 

Blingsoul Gauntlet Hand Bracelet 

It has an interesting design bracelet with copyright. The rings are adjustable for each finger. They can easily fit. You can switch the places of stones easily. You can mix them up to your mood. They are proper for specific occasions and Daily wear as well. Even though it is made of cheap metal, it doesnt look cheap at all. It comes in a soft and velvet bag in order to protect the stones on it. Overall, you will be very pleased with your purchase.

Savaş Ateş

I like reading books. I like to read about jewelry too. After reading a lot of books about it, I have started to visit jewelry manufacturers and stores. It is my number 1 hobby.

Recent Posts